Author Archives: Ahwatukee Garage Door Repair

About Ahwatukee Garage Door Repair

Please contact Ahwatukee Garage Door Repair immediately, and learn about how we plan to provide you with the very best services for your residential garage door at one of the finest rates around.

Expert Tips To Do A Garage Door Repair

If you have a car, chances are that you have a garage as well. Garage doors are an integral part of every garage. Normally, the doors go through a lot of wear and tear. Aside from this, they have to face frequent bumps, especially if the car owner is a novice. Therefore, you may want to take care of your garage doors. Below are some expert tips to help you perform a garage door repair.

 

How Can You Inspect The Door?

 

If you want to have an idea of how difficult and costly your garage door maintenance will be, you may want to carry a thorough inspection. Below are a few tips to help you do the inspection the right way.

 

  • Degree of damage

 

First of all, you should take a look at the door and get a general idea of how much damage is done. The damage may be minor or major. There is no need to mention that major repairs will cost a good deal of time.

 

  • The design of the door

 

Each door is designed differently, and that is the reason the repair method will also be different. So, make sure you are familiar with the design of your door.

 

  • Type of material

 

For making garage doors, manufacturers use a variety of materials. So, make sure you know the material used for making your garage door.

 

Tips To Cut Down On The Repair Cost

 

Now that you know how to inspect the door, you may want to find out ways to cut down on the repair costs. What you need to do is keep in mind a few guidelines that will help you reduce the costs as well as help you make the door last longer.

 

  • Clean the tracks

 

Often, dust and debris gets accumulated in the tracks. As a result, the door may not work as it should. So, you should clean the tracks. This will put less pressure on the tracks increasing their lifespan.

 

  • Reset the alignment

 

Regular use of the doors can cause misalignment of the door sensors. Based on the sensor type, you will get an alert. You can do the realignment with ease. You may also want to remove the dirt and obstructions that may be causing problems.

 

  • Fix the loose parts

 

With the passage of time, the garage bolts, nuts and springs may come loose, which makes the doors unstable. If you leave this issue unresolved, you may have a lot of issues down the road. Therefore, check the door on a regular basis for any loose blots, nuts and springs and tighten them if you can.

 

Last but not least, you should call a professional if you think the problem is beyond your control. If you are just a beginner or you have no idea how to do basic repairs, you had better get in touch with a good professional. After all, you may not want to end up with a terribly damaged door.

 

Original Article Here: Expert Tips To Do A Garage Door Repair

Related Article Here: Garage Door Repair Tips & Tricks

 

Having a problem with your garage door? Can’t fix it alone? It’s time for you to hire a professional help. Ahwatukee Garage Door Repair is now offering great deals for you!

Advertisements

5 Signs It’s Time to Call for a Garage Door Repair Service

In the grand scheme of things, garage doors don’t warrant a lot of attention from home owners. Not unless yours are acting up. Here are a few signs it’s time to put in a call to a garage door repair service in Oklahoma City OK sooner rather than later:

It won’t open

If the door won’t budge and stays shut or open, then you have a problem. This could be due to a wonky connection between the door and control panel. However, before you panic, make sure you look around and check that nothing is blocking the door or getting in its way. It might just be as simple as bumping a few things aside in your garage to get your doors to open and shut.

Slow response

If the door takes quite a while to shut or close, that could point to several problems in your garage door system. Some of these could have an easy fix, too. Just don’t attempt to fix them on your own. You might do more harm than good if you don’t have the right tools and knowledge to get the work done. Better to leave the work in the hands of experts instead.

Sagging sections

If parts of your garage door sag, the problem could involve one of your tension springs. Hire a garage door repair service in Oklahoma City OK so you’d know what the problem is.

Too much noise

If your door makes creaking noises whenever you shut and close the door, then it might be a problem with the springs or opener itself, says Strategies Online. Either one points to a problem that’s best addressed as soon as possible.

High energy bills

If your energy consumption bills are on the rise and faulty windows and a broken AC are not causing air leaks, then check your garage doors. If there are air leaks, your repair service might recommend a replacement instead.

Original Article Here: 5 Signs It’s Time to Call for a Garage Door Repair Service

Related Article Here: Why You Should Hire a Professional for Garage Door Repairs

Having a garage door problem? Worry no more! Just contact Ahwatukee Garage Door Repair anytime!

Why You’re Having Trouble With Your Garage Door in Winter

Snow Covered GarageIf you have started noticing that your garage door problems seem to start when it is cold outside, you are not imagining things. There is a good possibility that this is due to the weather outside and not just your imagination. You already have a lot to think about when the weather begins to change; now you have to add caring for your garage to the list of things that you have to do. If you have small children, you may have to deal with sick kids who are home from school. We understand how upsetting it can be to now have to deal with a temperamental garage door. Well at Ahwatukee Garage Door Repair in Ahwatukee, AZ, we can give you some relief in letting you know that cold weather problems is usually something easily fixed. Although most problems are easy to resolve, there are, occasionally some circumstances that may require the assistance of a professional service provider.

Below, you will find a list of common problems that you may experience during the winter months.

Contracting Metal

If the metal contracts, the door opener will not function. The door will not go up and down. You may need to apply a force adjustment in order to fix the problem. The process is applied to the garage door opener. By consulting your owner’s manual, you should be able to handle this on your own. However, if you are reluctant to perform the job yourself, we are always here to assist you with your service needs. If we are called upon to perform the task, we’ll also perform a clean sweep of the entire garage door to make certain that there are no other problems that could impede the movement of your garage door. There are some safety precautions that you may need to implement, which the manual may not discuss. This is very important and necessary if you wish to remain safe while making the needed adjustments. The door opener has a motor. Since this is a moving part, it is even more important to remain alert while performing any repairs or adjustments.

Frozen Garage Door

 

While we may not be prone to experiencing extreme weather in Arizona, there is still a possibility that it can occur occasionally. When it does, the garage door may become frozen. The garage door can freeze if ice builds-up around the tracks. You may also notice that the door will not go all the way down to the ground due to ice. The solution to this problem is fairly easy. Clear away the frozen ice underneath the door. We know that this might be a little of an inconvenience for most people but if you need access to your garage and do not want to experience the problem of your door being stuck, you may not mind a few minutes of being inconvenienced. An easy and quick fix for this problem is to spray some cooking oil on the rubber seal at the bottom of the door. This is actually a good way to avoid the door from freezing.

Broken Gears 

When you hear the garage door opener but your door is not moving, it could be due to broken gears. This can happen with the door is frozen. Since your door is heavy, this problem is magnified because it could also strip your gears. You may not be able to determine that this is the problem on your own if you lack the knowledge and understanding about garage doors. This is what we are here for, to probe and find out what is causing the problem. If it is winter, we can usually assume that the weather is a contributing factor.

Built Up Grease 

If you have been attempting to open or lower your garage door with no success, the problem could be due to grease that has settled on your track. This grease will harden when it is cold outdoors. This will undoubtedly make it difficult for the door to roll over. A simple grease solvent applied to the track can help get things moving again. After applying the grease solvent to your track, you will then need to put a coat of silicone-based lubricant on the track; this helps your garage door to move along the track more freely. In some cases, if you have vertical track, we may need to replace it. This might be the only way to remedy the problem.

We can put together this list because these are the most common problems that our customers send us service requests to resolve for them during the winter. Prior to contacting us, there are a few things you might be able to do to find the problem on your own.

  1. Check for broken springs. If you have a spring that is broken, you will have trouble with your door lifting up. So if it is winter and you are having trouble with your door lifting up, although you may conclude that it is due to the weather, it could actually be due to a broken spring.
  1. Again, grease that has built up around your track could be the problem with your door working. You can disconnect the opener and manually open the door. Once you do this, look around to see if there is any grease on the track that you need to clear away.
  1. You might need to adjust your garage door opener’s force close setting.

In order to prevent the problem with your garage not working during the winter, you can take some preventative measures:

  1. Spray a solvent on your hinges, track, and latch. This will keep your door moving along the tracks even when it is cold outside
  1. Lubricate your pulleys and bearings regularly
  1. Keep your door hinges clean so that during colder months the door will not get stuck
  1. Rollers, springs and bearings should be sprayed with a silicone-based lubricant

GARAGE DOOR WON’T WORK – THINGS TO CHECK BEFORE CALLING A PROFESSIONAL

garage_door_opener-1Have you ever tried to make a pot of coffee but the coffee maker sputtered and shut down, leaving you with a frustrated feeling and a strong need for some java? Remember when you tried to vacuum your living room carpet and the motor burnt out? As consumers, we hate it when our appliances don’t work. We have them in the first place because we want them to perform a task for us like making coffee and picking up dirt! When they don’t work we have the options to throw them away, have them repaired or fix them ourselves. Garage doors are no different. As the largest appliance in your home, your wood or steel garage door has a job to do – work on demand, every time! When it doesn’t we have those same options; fix it ourselves, pay someone else to fix it, or do nothing at all.

Option 3 is no option at all!

That’s right; we have to have the garage door fixed; we need it to work and every time, too. That leaves either calling in a local Ahwatukee, AZ garage door specialist or fixing the problem on our own. Actually, our Ahwatukee Garage Door Repair shop recommends both actions. This is because there are some things you can check before you ever call in a professional. Doing so will save you money and time and even teach you a few things about garage door parts and functions that are useful to know.

There’s more to your garage door than your garage door!

True statement! Your garage door is more than a slab of wood or metal that moves up and down. It also consists of other parts and accessories that include your springs, opener unit, cables, pulleys, tracks, hinges, sections, safety eyes, and lots more. Doing a simple check on some of these items can reveal what is really wrong with your door, and often, after making a simple adjustment, your garage door can work as good as new again!

Battery power

One of the simplest and easy checks that you can do is to inspect your remote’s battery. There have been countless service calls made by garage door professionals when all the homeowner really needed to do was to replace the battery in the remote. Check yours. If you have a home tester, proceed to do so. If you don’t, you can buy one inexpensively for about $20, either locally or online. Or, you can take your remote’s battery in to a local home improvement or retail store that tests them for free. If the battery is good, at least you know. If it’s not, simply buy one and you just saved yourself a service call and lots of time.

Safety eyes

Your garage door uses safety sensors to regulate when the door opens and closes. Check yours to see if they are aligned correctly. If you already know how to do this, proceed with your check. If not, refer to your owner’s manual or go online and view any number of videos that show how to check your sensors and align them correctly, if needed. While you are doing so, check for frayed or cut wires, cobwebs, loose hinges and other things that can block your safety beam or cut if off completely. Please note that your safety sensors are easy to adjust manually and once you are comfortable with doing so, you’ll be able to move them slightly so that the beams align and your garage door can work reliably again.

Garage door path blockage

Modern garage doors have a safety mechanism that prevents them from closing if something blocks their path. This is a good thing. Otherwise anything (or anyone) underneath the closing garage door can be hit or crushed under the weight and momentum of the closing door. Garage doors weigh several hundred pounds and who needs all that mass coming down on them? Something as small as a child’s toy can trigger this reversing action and send your garage door right back up after it had already started to close.  Other things that can do this are items like rocks, chewing gum or dirt in the tracks that can prevent the rollers from moving forward. If nothing is blocking your garage door’s path, be sure to check the tracks and see if they are clean and allow movement from the rollers inside. It’s always a good idea to keep garage items away from your sensors as they can not only fall or lean on them, they can block the closing garage door’s path and prevent it from closing. Garden tools, trash cans, hoses, skateboards and boxes should all be far enough away from your sensors or tracks so that movement is not infringed in any way.

Manual locks

Does this happen to you? Do you try to open your garage door but instead of going up, the opener motor runs for a few seconds and stops? You know it’s not the battery because there was enough power to start the motor running. You’ve already checked the tracks and sensors to make sure that both are clear and unobstructed. What could it be this time? It may be your manual lock. These are more common in older garage doors but you may have one and just possibly you accidentally locked your garage door into place. These locks are the ones that look like a knob or handle in the middle of the garage door with two horizontal bars that stretch out, one from each side. There’s usually a small button on the top or side of the knob that allows you to lock the garage door from the inside. If bumped, this button allows the bars to slide across the garage door and seal it shut. Don’t worry; it’s easy to unlock! Simply turn the knob. You should hear a clicking sound that indicates that the lock is being taken off. By turning the handle, the horizontal bars are moved away from the edges and your garage door is now unlocked.

CAN’T GET YOUR GARAGE DOOR OPEN OR SHUT? DON’T FRET. HERE’S WHAT YOU CAN DO!

If your garage door ever goes on the fritz, there are various reasons your garage door is out of whack. Some are simple; some are complex. But don’t waste your precious time going into a panic. There are plenty of steps you can take. garage_door_not_opening_large

Problems and Solutions

What if the garage door goes down all the way, but then opens again? The open-and-close limit settings of your garage door opener are likely failing. The settings instruct the garage door opener on how far the garage door should go before it shuts all the way down. If it’s set too high, the door will touch the ground before the opener thinks it should, presuming that the door is hitting an object in its path. If so, it will reverse so it won’t crush it. Follow the operator’s manual to find out how to set the open-and-close limits.

 

What if the garage door won’t close? The garage door has a photo sensor eye on each side. Between them is an invisible beam, which, when broken, prevents the garage door from shutting. Look closely to see whether they’re grimy or misaligned. Depending on which brand and style of sensors you have, if the light’s blinking, there’s something wrong. Or, if you have sensors with red and green lights, the red one often indicates that it’s not fully functioning.

An additional sensor problem might be the wiring. Inspect the sensors’ connections, making sure the wires aren’t corroded or loose. Another likelihood is that there’s a short in the wiring somewhere, which can result from a staple used during the initial installation; over time, vibrations can lead to a disconnect. Wires can also eventually stretch, resulting in disconnection.

What if your garage door doesn’t open? Then probably the springs are failing, not remaining contracted as they should. Try shortening the cables with a bracket to add tension on the springs. If your garage door has one or two torsion springs, one or both are probably broken. Don’t adjust the garage door yourself! If incorrectly serviced, a garage door spring can cause serious injury or even death. The cables, drums, or bottom brackets might also need adjusting. Or, the springs may require replacement. Either way, it’s a good idea to hire a dependable garage door professional. If you live anywhere in Ahwatukee, Arizona, consider a reputable local garage door company such as Ahwatukee Garage Door Repair.

Does the garage door opener run for a few seconds, then turn off? This occurs when the garage door is closed; the motor attempts but fails to lift up the door.

1.Take a close look at the track for possible obstacles.

2.Examine the springs.

3.See if your garage door is the kind with a built-in lock, because maybe it’s engaging by mistake. This typically happens on older garage doors.

Does your garage door opener run, but the garage door still doesn’t move? If there’s a power outage, your garage door opener has a disconnect switch, so you can shut or open your garage door by hand. The switch, attached to a knob or rope, can get unhooked accidentally.

1.Open or shut the garage door all the way.

2.Reattach the hook securely.

3.Try opening or closing the garage door again using the transmitter. It should work now.

Is the garage door randomly closing and opening? If your garage door opens or closes by itself, that’s both a security risk and a nuisance. Try this:

1.Check the transmitter. Be sure it’s not wedged under an object pressing down inadvertently on the control mechanism. For instance, the transmitter might be beneath an item you left in your car, or somewhere else nearby.

2.Test the transmitter’s frequency. A neighbor may actually have your same exact frequency.

Does your garage door shut part of the way, yet open again? A garage door has a reversing mechanism so it won’t smash anything in its path. The reversing instruction is activated by any objects on the floor blocking the door’s path ~ a trash can, bicycle, or box. You could see debris on the tracks ~ dirt or a minute object ~ that’s stopping the rollers from moving forward. This calls for professional attention.

Does your garage door slam down with a bang? You could have a broken tension spring, which counters the garage door’s weight. Probably the cables connected to the tension spring are broken. Either is hazardous. A garage door technician is needed.

The garage door track may be out of alignment. The metal track of the garage door must be properly aligned, or it won’t budge. Check if there are gaps between the rollers and the rail, or any bends in the rails. As time passes, the garage door’s weight compounds these issues, so hire a garage door expert, because the door is going to be gradually more dangerous to operate.

The transmitter batteries could be low. Perhaps all you need is replace them, and the garage door will open.

Avoid Future Garage Door Issues

The minimal effort required to keep your garage door in tiptop shape means that you won’t have to replace it for a good long time.

Once a month, check your garage door system’s components.

1.Replace worn parts.

2.Tighten loose bolts.

3.If you notice any odd noises when your garage door opens and closes, don’t procrastinate; investigate.

Every two years, clean your garage door.

1.Wash both sides with a sponge with mild dish soap and water, and rinse well.

2.Cleanse the sensor eyes using a dry, clean cloth.

3.Keep the area around the sensors free of cobwebs and grime.

4.If you have a steel garage door, apply car wax for cold-weather protection.

5.If you have a wooden garage door, if there’s chipping or peeling, apply a fresh coat of paint.

Schedule an annual inspection with a local upstanding garage door repair company. Pulleys, cables, springs, and wires need expert attention.

Follow a maintenance schedule routine to prolong the life of your garage door. If your garage doubles as a workshop or office, it’s important to lubricate the springs, hinges, and rollers ~ once a year, before winter comes. Otherwise, ultimately the springs will rust and the coils will bind. Use a top brand, so it won’t dry out. You only need a light coating.

AHWATUKEE GARAGE DOOR REPAIR: GARAGE DOOR MAINTENANCE

The team at Ahwatukee Garage Door Repair in Ahwatukee, AZ knows that the garage door is an important feature of your property, whether you have a commercial or residential property. Therefore, maintenance is also very important, and it is not something that can be overlooked. The garage door can end up taking up a great deal of the exterior part of your property. Some people have huge doors! Anything that you use every single day needs to be maintained, and the garage door is no exception. The bigger it is, the more noticeable problems might be to your neighbors. Think about it – if you have a garage door that takes up a large amount of your property, and it gets stuck halfway, neighbors are going to notice. This is especially true for forward facing garages. And while a small garage door that is towards the back of your property might not be noticeable if it is off track, it can still be dangerous. These are things that make maintenance very important. You want to extend the life of your garage door whenever possible, too. Here, you will discover ways to keep your garage door in good condition for as long as possible. Have a look!

The Basics: Do a Visual Check

This is something that anyone can do, even if a person doesn’t have experience with garage doors. Simply look at your garage door. Watch it open and close, and see if anything looks as though it is off. Does the garage door shake more than it should while opening, or rattle, if you will? Do you notice any bending or warping in the tracks? Is there an obstruction in the track? If you can see that anything is off, it can ultimately cause problems in the operation of your garage door. If you can see a gap in a spring, for instance, this is a major issue that needs to be placed in the hands of an expert. Keep your eyes open when your garage door is opening and closing, at least once in a while. Also, make note of any mold spores, specifically on wood garage doors. Keep everything clean to prevent harmful growth!

garage-door-repair

Check Bolts to Ensure They Are Tight 

Hardware can, over time, become looser. Bolts should be carefully screwed into place. You should be able to see if anything is loose, for instance, nuts or bolts.

Remove Any Obstruction in the Tracks

We mentioned checking the tracks for obstructions. Ensure that if there is anything in the way that it is removed. It’s easy to sweep out the garage once in a while, ensuring leaves, sticks and dirt don’t get in the way. You don’t want debris to make its way into your garage door parts, and this is one way to prevent this from happening.

Check the Rollers

Garage door rollers are typically either nylon or steel and they can be expected to last for a few years – usually up to seven. Then, once they have lasted their expected lifespan, it is time to have them replaced. Either way, you should check them out every so often. Look for signs of wear, chipping or even cracking. If you do notice any of these concerns, it is a wise idea to change the rollers. Of course, if you don’t have the appropriate experience, it’s best to hire an expert.

Look at the Cables

There is a lot of tension associated with cables, so any mistakes can cause serious injury. However, it is safe to just look at them and do a visual exam. Notice broken strands where the cable is connected to the bottom roller bracket.

Do a Test For the Reverse Feature

It is quite simple to test your garage door to make sure all is working properly in terms of the reverse feature. Place an object in the path of the garage door. Does it reverse automatically on its own? It should, upon sensing something in its path. If something is wrong, and you aren’t sure what to do, reach out to an expert.

Lubricate or Oil Parts

Parts of your garage door need oil and lubrication so that they function correctly. But you need to be careful of excess grease hardening. Use a silicone based lubricant on the springs. Chains and screws tend to do fine with hardware store lubricant but if in doubt ask your garage door manufacturer.

Look At Weather Stripping

Weather stripping is important. It helps out with things like insulation. The weather stripping is generally at the bottom of the garage door, and you can see if it is cracking or ripping at all. This is something that can be purchased from your local home improvement store.

Ensure Everything is Balanced

If a garage door isn’t balanced properly, then it will fail to function correctly. One can check the balance of the garage door by disconnecting the door from the opener system. Upon disconnecting it, try lifting the door physically. It should lift with ease. When you close the door, it shouldn’t be problematic for you. If you are straining yourself or if something doesn’t seem right, then it is a good idea to call in a professional to take a look at it.

It is important to stay on top of garage door maintenance. Of course, you can always just hire an expert to come out to do a safety inspection for you. Doing a Google search for a local garage door technician in your city should reveal plenty of results. Hire a person that is licensed and insured so that you can trust that you are protected when they do their job. It is so important to make note of any issues with your garage door so that they can be fixed right away. The faster problems are resolved, the longer your garage door is likely to last. Keep it in good condition. Keep it maintained! Hopefully these tips help you to enjoy a long lasting, safe to use garage door for many years to come.

Broken Garage Door Springs-How to Stay Safe

If you have a broken garage door spring, you can’t continue using your garage. If you do, you may end up causing harm to yourself or anyone else who may be in the car with you when the garage comes crashing down. This is inevitably what will occur if you continue using your garage with worn springs. Someone who has the training and experience to do it should, only handle making any type of repairs or adjustments to springs, torsion or extension. We understand that it is one thing to tell someone to remain safe and to actually tell them how they can do it. If you’re going to remain safe from the harm of broken springs you’ll have to be proactive. At Ahwatukee Garage Door Repair we suggest that you have your garage door regularly serviced. Since a garage door has plenty of moving parts, it is best to allow someone with proven experience to handle any repairs that need to be made. It is impossible for you to go on using your garage without occasionally having something go wrong. If you or family members are using your garage every day, several times a day, this is going to cause wear and tear on your springs. The weight of the door is held up by the springs and since the door is heavy, it is going to wear on the springs, eventually. You do not want to let the springs get so worn that they break. What you should do is make sure you can have the springs repaired before it reaches this point. This is why it is in your best interest to rely on the services of a professional garage door service to handle the repairs for you.

7253318_orig

Avoid DIY Spring Repairs

Perhaps you would rather handle the repairs to your garage door springs on your own. This is commendable but it isn’t something that we would recommend. There are several reasons that we would recommend that you only allow a trained professional to handle this for you.

Not Making All Necessary Repairs

We often find that when homeowners repair their own springs they only repair one and not both. The spring that isn’t replaced will have to do all of the work of carrying the weight of the door. This can be problematic because the weight needs to be distributed evenly between both sets of springs. When you only repair one spring, it causes other parts of your garage door to work harder, causing more stress on those parts too. Now you can probably see why we would suggest that you allow a trained service technician to handle this job for you. A trained professional will know how to effectively repair both sets of garage door springs. It eliminates all of the other problems that can occur when you only repair one spring at a time.

Missing a Step in the Process

If you are not a trained garage door service technician, you could easily leave out a step in the repair process. If this occurs, this means that the job that you perform would be useless. You must adhere to every step of the repair process in order for the springs to be properly repaired. If you leave out a single step, it could still mean that your spring will eventually break. A trained professional will know all of the necessary steps and they will also perform a thorough inspection of the spring once the job has been completed to ensure that every step was taken.

Putting Too Much Pressure on Your Garage Door Opener

The weight of the door has to be evenly distributed in order for the other parts of the garage to work efficiently. When they are not one of the most important features of your garage door will suffer, the automatic opener. The opener is what helps to open and close our garage door. When the springs are not counterbalanced, they may start to affect the way the opener functions. You may begin to notice that your garage door will start to act as though it will not open or close. This can be avoided and preserve the life of your opener if you call on the services of a qualified garage door service technician.

How a Service Technician Adjusts Springs

In order to adjust your springs they will begin by turning off the garage door opener with the garage door closed. They will then secure the door to keep it from opening up while they are making the needed adjustments. They know where all of the parts are and this helps to keep them safe while they are handling the job of adjusting your springs. When a homeowner attempts to make repairs or adjustments to their springs on their own, they run the risk of being harmed or harming themselves if they are not fully aware of where all of the parts are located. When adjusting your garage door springs, the technician will adjust both sides so that the tension is distributed evenly. Again, if only one spring is adjusted and not the others, this means that the other spring will work harder to make up for the loss of the other spring. Finally, the technician will lubricate the springs. They are lubricated so that they will function properly. It is a good idea to make sure that the springs are lubricated several times a year so that they will continue working smoothly. Repairing and adjusting your garage door springs is not a simple chore. It is something that takes a great deal of precision and know-how. Every single step needs to be taken in order for the job to be performed effectively.

If you are not currently having your garage door serviced annually, this is a good reason to do so. If you want to be certain that your garage door does not fall down and cause you or anyone else any harm, you’ll need to make sure that they are always in good working condition.